Drilling Presses - Solberga
 |
Adjustable drill head heights on all models (n/a
for SE2040) |
|
Drill heads & table arms can swivel 360 degrees
around the column (n/a for SE2040) |
|
Helical drive Gears with fiber to steel mesh provide
virtual maintenance free, quiet & efficient operation |
|
Spindles and columns are made of top quality swedish
steel |
|
Spindles are designed recessed into the quill
housing providing superb rigidity |
|
Powerfeed units are equipped with an automatic
feed overload |
|
Each machine is equipped with electrical thermal
overload switch, no-volt release and emergency stop |
| SPECIFICATIONS |
SE2025 |
SE2030 |
SE2035 |
SE2040 |
| Drills to the Center of Circle |
20" | 25" | 25" | 26" |
| Drilling Capacity, Mild Steel |
1" | 1.2" | 1.4" | 1.6" |
| Spindle Travel |
5.3" | 6" | 6" | 7.5" |
| Quill Diameter |
2-3/8" | 2-7/16" | 2-7/16" | 2-3/4" |
| Spindle Taper, MT |
3 | 3 | 4 | 4 |
| Spindle Speeds (8) |
90-3285 | 90-3610 | 90-3610 | 108-1800 |
| Available Powerfeed Rates
(4) |
0.004-0.012 | 0.004-0.012 | 0.004-0.012 | 0.004-0.013 |
| Max. Distance Spindle - Table |
33" | 35" | 32" | 33" |
| Column Diameter |
4" | 4.1" | 5" | 5.5" |
| Table Size |
14"x20" | 14"x20" | 22"x26" | 20"x24" |
| Vertical Travel od Drill Head |
8" | 10" | 7" | Fixed |
| Vertical Travel of Table |
21" | 28" | 27" | 25" |
| Horsepower (Low Speed/Hi Speed) |
1.1/1.5 | 1.5/2 | 2.2/3 | 3 |
| Net Weight Lbs. |
400 | 570 | 640 | 700 |